Gang Writer for HT8/HT32 MCU Gang-writer00-8

1. Support Holtek 8-bit Flash MCU programming
2. Work with the HOPE3000 software
3. Program codes are downloaded to the programing module. Support offline programming.
4. Online one-click quick update the programming module firmware Compact size
5. 8 sites parallel programming, can configure to become 2/4/6/8 sites
6. Expandable to 12 or 16 sites parallel programming
7. Programming status LED indication

Product information

Dimension: 136 x 75 x 23 mm
Net weight: 463.3g
Product includes:
1. Gang-Writer8-8 x 1
2. USB cable x 1
3. 5V USB-Connector power adapter x 1
4. 20pin (5PIN × 4ICP) PHB connector x 2

1. Is there a limit to the location of the programming module G-ICPM08040 connected to the base board G-ICPB00040?
There is no limit, there are 4 SLOT areas (SLOT1 – SLOT4) on the base board, and the programming module can be connected to any SLOT area. A single base board can connect up to four programming modules, that is, each of the SLOT area is loaded with a programming module.

2. There are two START button areas on the base board. Are the functions the same?
The two START button areas have the same function; this design is convenient for the operator to press the button from different directions.

1. Development Tool: Gang-Writer8-8, including user’s guide, software, etc.